Innovative new products at Electronica - Booth# B5 312 -

Exxelia will be exhibiting at Electronica, the biggest global trade fair for electronic components, which will take place from November 8th to 11th in Munich, Germany. On its booth # B5 312, the company will be showcasing a bunch of innovative new ranges.


Felsic HV, long lifetime and high voltage screw terminal
The Felsic HV family of aluminum electrolytic screw terminal capacitors provides great performances in energy density and ultra-long lifetime. For example products can withstand 8 000 hours at 105°C under high values of current which makes them the perfect choice to overcome railway constraints. The family also has one of the lowest ESR for aluminum capacitors, less than 10m0hms in most cases. Products are available for voltages from 160 to 450 Vdc, and offer capacitance values from 1500μF up to 47 000μF. Thus the family is a good compromise between reliability and compacity, with for example 47 000μF @ 160V in a 90x200mm volume.

Cost-effective common-mode chokes qualified for aerospace
Designed and qualified for aerospace, the TCM series is available in a through-hole package for horizontal and vertical mounting. TCM common-mode chokes are offered with inductances from 0.7 to 47mH under rated currents from 0.3A to 4A, and thoroughly tested by a dielectric withstanding strength at 1500VAC. Their excellent thermal properties allow the TCMs to operate without a hitch from -55°C up to +125°C, which, combined to the high mechanical resistance of the chosen materials (all meeting to UL94 V0 rating) make those products the perfect fit for aviation, defense and transportation industries.

Ceramic capacitors based on the new C48X dielectric
New range of high voltage ceramic capacitors based on brand new dielectric material C48X, combining most advantages of NPO and X7R dielectrics. Compared to X7R material, C48X dielectric allows to get the same capacitance values under working voltage with the unrivaled advantage of a very low dissipation factor (less than 5.10-4). Besides, it can also withstand very high dV/dt, up to 10kV/μs, which makes it the solution of choice for pulse and fast charge/discharge applications or firing units. Thus capacitors with C48X dielectric appear to be ideally suited for power applications where heat dissipation may be detrimental to performances and reliability.

Ultra low ESR, high RF power and high self-resonant frequency
The new NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies. The series is available in 1111 size with capacitance ranging from 0.3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C and at 500 VDC. The lowest ESR is obtained by combining highly conductive metal electrodes and proprietary of new NPO low loss rugged dielectrics. NHB series particularly fits for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment.

Publié le 02 Oct 2016 par Marion Van de Graaf

Euclid : La mission de l'ESA embarque nos composants magnétiques et condensateurs.

Cette réalisation remarquable vient s'ajouter à notre participation réussie à la mission JUICE de l'ESA et à la présence de nos composants à bord du rover Perseverance de la NASA. Euclid est une mission spatiale ambitieuse de l'Agence Spatiale Européenne (ESA) qui vise à cartographier l'Univers observable et à enquêter sur la mystérieuse énergie sombre et la matière noire. Le satellite étudiera des galaxies qui se trouvent à différentes distances de la Terre au moyen d’un télescope de 1,2m de diamètre qui embarque deux instruments : l’imageur observant en lumière visible (VIS) et le spectro-imageur proche infrarouge (NISP). Nous sommes fiers d'avoir été sélectionné comme fournisseur de composants passifs de haute fiabilité pour cette mission cruciale. Nos composants magnétiques (CMC 15, SESI inductance 9.1, 15 & 22) et nos condensateurs (PM 948S, PM 94S, DBIT X3S) ont été soigneusement conçus et fabriqués pour répondre aux exigences extrêmes de l'espace (ESA QPL) et jouer un rôle clé dans le succès de la mission Euclid (Nous équipons le PCDU = Unité de distribution de conditionnement de puissance).  Notre expertise et notre expérience dans la conception et la fabrication de composants électroniques passifs sur mesure pour le domaine spatial, nous permettent de répondre aux exigences les plus strictes de l'industrie aérospatiale. Nous sommes déterminés à maintenir notre position en tant que fournisseur de confiance pour les missions spatiales de renom.   Crédit image : ESA/C. Carreau,CC BY-SA 3.0 IGO View the press release