IMS - Booth#2050
June 11-12, 2018 : IMS (International Microwave Symposium) ) is the premier annual international meeting for technologists involved in all aspects of microwave theory and practice.
10-15 June, 2018
Gammes de condensateurs HiQ à l'EuMW
Exxelia Temex will be exhibiting at European Microwave Week 2016 through its mother group Exxelia. Showcased on the booth #237 will be all the company’s solutions intended for applications requiring low loss in equivalent series resistance (ESR) and high Q factor for specified DC or RF voltage, including Classic HiQ, Super HiQ and NHB series. Classic HiQ series is a range of RF ceramic capacitors providing low ESR and Ultra High-Q. The high-density ceramic construction provides a hermetic package and the highest working voltage on the market; up to 1500V and RF currents. Available in 0505 and 1111 sizes with capacitance values from 0.1pF up to 1000pF, the Classic HiQ series is perfectly adapted for applications such as: linear RF power amplifiers (LPA), mixers, filter networks, timing circuits, delay lines, oscillators, etc. Super HiQ series offers excellent performance in critical high RF power applications requiring consistent and reliable operation. The range has been engineered in all standard EIA sizes to provide constant capacitance over voltage, temperature and aging. It is also available in RF specific sizes (0402, 0603, 0805, 1206, 1210). The ultra-stable Super HiQ series offers Ultra-low ESR and Ultra HiQ with capacitance values from 0.2pF up to 1000pF. In addition, it enables superior high-voltage handling with working voltage up to 1500V. This series is particularly fit for cellular base station equipment, broadband wireless service, RF generators applications. Typical circuit applications: filters networks, matching networks, tuning, coupling and DC blocking. New: NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies, available in 1111size with capacitance ranging from 0.3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C and at 500 VDC. The lowest ESR (Equivalent Series Resistance) is obtained by combining highly conductive metal electrodes and proprietary new NPO low loss rugged dielectrics. NHB series is particularly fit for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment. Typical circuit applications: impedance matching, bypass, feedback, tuning, coupling and DC blocking. All capacitors are packaged either as bulk chips or with tape or reel. All components are RoHS compliant and available with magnetic and non-magnetic terminations. They also provide as a good alternative for MIL-PRF-55681 / CDR capacitors. European Military, space grades and custom made capacitors are also available on request.
Nouvelle gamme de vis hyperfréquence autofreinées en Invar
Working frequencies in Space applications are shifting to Ka, Ku or even Q band, while cavity filters are undergoing the general trend towards miniaturization: this context calls for a much more precise and stable tuning element now offered by Exxelia Temex, daughter company of Exxelia, through their last innovative and unrivalled solution to incorporate a self-locking system into their Invar Tuning Elements. Invar-36 is a unique Iron-Nickel alloy (64 % Fe / 36 % Ni) sought-after for its very low coefficient of thermal expansion. With 1.1 ppm. K–1 between 0°C and 100°C, Invar-36 is about 17 times more stable than Brass which is the most traditional and common alloy Tuning Elements are made of. The working temperature range in Space is so wide that this property becomes essential for a reliable and stable cavity filter tuning. Self-locking system is a technology commonly used on Tuning Element made of Brass or other soft “easy-to-machine” alloys but is innovative and pretty advanced when applied to hard and tough Invar 36. The design consists of two threaded segments separated by two parallel slots. After cutting both parallel slots, the rotor is compressed in its length in order to create a plastic deformation. Thus, an offset is induced between the two threaded segments which generates a constant tensile stress in the rotor from the moment threaded segments are screwed.