11-15 June, 2018 : Eurosatory, the international land and airland Defence and Security exhibition.
11-15 June, 2018
Exxelia expose à Electronica China - Stand E5 5580 -
Ultra low ESR, high RF power and high self-resonant frequency The new NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies. The series is available in 1111 size with capacitance ranging from 0. 3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C and at 500 VDC. The lowest ESR is obtained by combining highly conductive metal electrodes and proprietary of new NPO low loss rugged dielectrics. NHB series particularly fits for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment. Felsic HV, long lifetime and high voltage screw terminal The Felsic HV family of aluminum electrolytic screw terminal capacitors provides great performances in energy density and ultra-long lifetime. For example products can withstand 8 000 hours at 105°C under high values of current which makes them the perfect choice to overcome railway constraints. The family also has one of the lowest ESR for aluminum capacitors, less than 10m0hms in most cases. Products are available for voltages from 160 to 450 Vdc, and offer capacitance values from 1500μF up to 47 000μF. Thus the family is a good compromise between reliability and compacity, with for example 47 000μF @ 160V in a 90x200mm volume. Cost-effective common-mode chokes qualified for aerospace Designed and qualified for aerospace, the TCM series is available in a through-hole package for horizontal and vertical mounting. TCM common-mode chokes are offered with inductances from 0.7 to 47mH under rated currents from 0.3A to 4A, and thoroughly tested by a dielectric withstanding strength at 1500VAC. Their excellent thermal properties allow the TCMs to operate without a hitch from -55°C up to +125°C, which, combined to the high mechanical resistance of the chosen materials (all meeting to UL94 V0 rating) make those products the perfect fit for aviation, defense and transportation industries. Two new ranges of Metallized Polyester Film Capacitors qualified for space Ranges PM907S and PM948S of Film capacitors obtained the QPL certification from the European Space Components Coordination (ESCC). PM907S and PM948S part of the PM series, are full ranges of Metallized Polyester Film Capacitors. PM907S products are suitable for voltages from 50V up to 1250V and offer capacitance values from 82nF up to 180μF. PM948S can be used with a voltages from 50V up to 630V with capacitance values from 22nF up to 47μF. Both ranges can support extreme conditions with temperatures from -55°C to +125°C, and offer high energy density, low ESR & ESL and high RMS current. Products are typically being used in SMPS (Switch Mode Poser Suppliers) and BUS filtering. A new range of high capacitance wet tantalum capacitors The new wet tantalum WT83 capacitors series is based on the CLR93 MIL specification but with double the capacitance. For instance, WT83 offers 1000µf 100V in a D size case. That is a pass for impactful miniaturization of existing designs by playing on both size, by reducing the PCB footprint, and weight. Besides, thanks to their hermetically sealed package, the WT83 series can withstand high vibrations and shock levels (50g and 100g respectively) which makes them the solution of choice for Aviation, Space and Defense.
Gammes de condensateurs HiQ à l'EuMW
Exxelia Temex will be exhibiting at European Microwave Week 2016 through its mother group Exxelia. Showcased on the booth #237 will be all the company’s solutions intended for applications requiring low loss in equivalent series resistance (ESR) and high Q factor for specified DC or RF voltage, including Classic HiQ, Super HiQ and NHB series. Classic HiQ series is a range of RF ceramic capacitors providing low ESR and Ultra High-Q. The high-density ceramic construction provides a hermetic package and the highest working voltage on the market; up to 1500V and RF currents. Available in 0505 and 1111 sizes with capacitance values from 0.1pF up to 1000pF, the Classic HiQ series is perfectly adapted for applications such as: linear RF power amplifiers (LPA), mixers, filter networks, timing circuits, delay lines, oscillators, etc. Super HiQ series offers excellent performance in critical high RF power applications requiring consistent and reliable operation. The range has been engineered in all standard EIA sizes to provide constant capacitance over voltage, temperature and aging. It is also available in RF specific sizes (0402, 0603, 0805, 1206, 1210). The ultra-stable Super HiQ series offers Ultra-low ESR and Ultra HiQ with capacitance values from 0.2pF up to 1000pF. In addition, it enables superior high-voltage handling with working voltage up to 1500V. This series is particularly fit for cellular base station equipment, broadband wireless service, RF generators applications. Typical circuit applications: filters networks, matching networks, tuning, coupling and DC blocking. New: NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies, available in 1111size with capacitance ranging from 0.3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C and at 500 VDC. The lowest ESR (Equivalent Series Resistance) is obtained by combining highly conductive metal electrodes and proprietary new NPO low loss rugged dielectrics. NHB series is particularly fit for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment. Typical circuit applications: impedance matching, bypass, feedback, tuning, coupling and DC blocking. All capacitors are packaged either as bulk chips or with tape or reel. All components are RoHS compliant and available with magnetic and non-magnetic terminations. They also provide as a good alternative for MIL-PRF-55681 / CDR capacitors. European Military, space grades and custom made capacitors are also available on request.