Voir toutes les actualités

New Plug&Play filters for datacenters and mission critical facilities

New unrivalled Plug & Play TEMPEST filters for data centers and mission critical facilities.

Electronic equipment can leak sensitive information over conducted or radiated electromagnetic emanations, and signals transmitted down unprotected lines can potentially be intercepted. That’s why filters are implemented into systems to prevent EMI disturbances, as TEMPEST filters stop the high frequency EM signals (or noise) emanating inside the secured environment.

Exxelia has a long history of manufacturing state-of-the-art electromagnetic interference (EMI) filtering technologies for space, avionic and defense markets. Thanks to this in-depth knowledge, Exxelia came to the conclusion that the installation of a product is as critical as its reliability, especially when shielding continuity and sensitive copper terminals are involved.

That’s where Exxelia’s new full range of TEMPEST pluggable filters will save time and spare headaches! The 9260W series is a multi-socket line extension with a built-in 16A Tempest filter (minimum 60dB, from 100KHz to 1GHz), CE qualified according to EM 60950-1 standard. 9260W series Plug&Play solution is available with UK, US and EU standard plugs and can be provided with any other standard plug upon request.
In addition, Exxelia completed its offer with the 9259W series of pluggable filters featuring various plug interfaces such as VGA/DVI, USB, Ethernet, Phone, Audio and much more.

9260W series and 9259W series are both fully compliant with EMC expectations and allow considerable time saving and cost-effectiveness. When a standard filter needs to be wired and shielded to each socket one-by-one before carefully re-closing the whole equipment, Exxelia new series can be installed using no special tools and with a smaller footprint. To all people handling sensitive information, a simple plugging operation is now enough to protect their data.

Available now, 9259W and 9260W series are fully customizable upon request.

Publié le 15 Mar 2017 par Marion Van de Graaf

EuMW 2017 - stand 190

Ultra low ESR, high RF power and high self-resonant frequency The NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies. The series is available in 1111 size with capacitance ranging from 0. 3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C @ 500 VDC. The lowest ESR is obtained by combining highly conductive metal electrodes and proprietary of the NPO low loss rugged dielectrics. NHB series is particularly fit for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment. Typical circuit applications: impedance matching, bypass, feedback, tuning, coupling and DC blocking. 100% invar tuning screws with self-locking system   Invar-36 is a unique Iron-Nickel alloy (64 % Fe / 36 % Ni) sought-after for its very low coefficient of thermal expansion. With 1.1 ppm. K–1 between 0°C and 100°C, Invar-36 is about 17 times more stable than Brass which is the most traditional and common alloy Tuning Elements are made of. The working temperature range in Space is so wide that this property becomes essential for a reliable and stable cavity filter tuning. Self-locking system is a technology commonly used on Tuning Element made of Brass or other soft “easy-to-machine” alloys but is innovative and pretty advanced when applied to hard and tough Invar 36. The design consists of two threaded segments separated by two parallel slots. After cutting both parallel slots, the rotor is compressed in its length in order to create a plastic deformation. Thus, an offset is induced between the two threaded segments which generates a constant tensile stress in the rotor from the moment threaded segments are screwed. High Q Factor Dielectric Resonators Dielectric resonators are designed to replace resonant cavities in microwave functions such as filters and oscillators. Exxelia has developed with support of ESA and CNES, a new high-end dielectric material, E7000 series, designed for high-end filters where high Q factor is requested. E7000 is Ba-Mg-Ta materials based that combines an ultra-high Q factor and the possibility to get all the temperature coefficients upon request. E7000 provides high-performance requested for space use in the frequency range 5 to 32 GHz, and guarantees up to Qxf > 250 000 at 10GHZ. Typical applications: Satellite multiplexing filter devices, radio links for communication systems (LMDS), military radars.

Inauguration du site EXXELIA Maroc

Nous sommes ravis d'annoncer l'inauguration de notre tout nouveau site moderne construit sur mesure au Maroc, une installation industrielle de 10 000 m2 dédiée aux produits électroniques. Ce site ultramoderne est équipé d'une salle blanche de 200 m2 et est entièrement climatisé, ce qui constitue une nouvelle norme dans le domaine de la fabrication électronique.     Les caractéristiques en un coup d'œil : Orienter vers l'industrie 4.0 : Notre usine suit la méthode Hoshin, embrasse l'intégration numérique et adopte les principes du lean. Cela garantit l'efficacité, la précision et l'adaptabilité de nos processus de fabrication. Modernisation du lieu de travail : Nos ateliers sont conçus en tenant compte du bien-être de nos équipes. Nous avons modernisé les postes de travail, introduit de nouveaux équipements plus fiables et plus productifs, créant ainsi des environnements propres, agréables et ergonomiques. Un environnement écologique : L'accès à un parc améliore l'expérience globale de l'espace de travail, favorisant une atmosphère positive pour l'innovation et la collaboration.   Activités principales : Sous-traitance interne pour les sites français et américains : Notre usine est spécialisée dans la fabrication des gammes de composants électroniques, notamment ceramic capacitors, electrolytic components, film products, stators, magnetic products, position sensors, et slip rings. Assemblage électronique pour les clients externes : Nous offrons des services d'assemblage électronique pour les clients externes, couvrant le bobinage de transformers et de chokes, l'assemblage de rotors et de stators, le câblage, et les microwave.   Cette étape marque une expansion significative pour Exxelia et renforce notre engagement en faveur de l'excellence et de l'innovation dans le domaine de la fabrication électronique.    

Voir toutes les actualités