Certifications

Our certifications :

ISO 9001 : V2008	HSPM

Lead-Free and legislative compliance status by product type : document RoHS

- Our Conflict free minerals certificate

- Our REACH Certificate

For the last 30 years FIRADEC has offered its customer a high level of Quality service which lead to :

• ISO 9001: 2000 Certification by the BV_LCIE, certificate of approval of manufacturer QC 001002-3, clause 2 (2005) registration number N° 015-93 edition 12.
• To undertake partnership/grouping (Qualité des Approvisionnements pour Les Industries Françaises Aéronautiques et Spatiales) QUALIFAS and ASD-AESE the evaluation of its Quality system according to EN9100 and obtained 89,5/100 on the 29 November 2007.
• 17 Certificates for CECC and CEI product qualification.
• Being listed on the list EPPL Part I and EPPL Part II for CNES qualified products in accordance with ESA/SCC SPECIFICATIONS.
• Custom development in accordance with customer specifications.
• Being added to GAM and MUAHAG part list for the European military industry.
• Certified according to IECQ HSPM QC 080000 since the 27 June 2006 by LCIE-SNQ, certificate n° 193-06-002 issue 2 for is Hazardous Substances Process Management.

Thanks to the latest equipments the Quality department is able to carry out approval follow up tests as well as on line production testings.

• X Rays Scanning
• Optical Microscope
• Test benchs for :

- Temperature cycling

- Rapid change of temperature

- Humidity

- Combined climatic sequence

- Low Pressure

- Charge and discharge

- Efficient current measurements at 100 and 500 kHz

- High and Low Temperature Characterisation

NORMES AND SPECIFICATIONS

The products which are described in this catalogue are generally made to a CECC specification ; these documents give in detail the following information for each type :

• Climatic, electrical and mechanical characteristics

• Test and inspection procedures

• Sampling methods and levels

• Periodical tests

The reference specifications concerning the tantalum capacitors are the following :

• CECC 30 000 (NFC 83-100) Generic specification: fixed capacitors

- Terminology

- Quality Assessment Procedures

- Test and inspection methods

• CECC 30 200 (NFC 83-112) Sectional specification: Tantalum capacitors

- Preferred characteristics

- Quality Assessment Procedures

- Test and inspection methods

• CECC 30 201 XXX : detail specifications solid tantalum capacitors

- Detailed characteristics for each type

• CECC 30 202 XXX : detail specifications wet tantalum capacitors

- Detailed characteristics for each type

• CECC 30 800 (NFC 83-113) : Sectional specification: tantalum chip capacitors

- Preferred characteristics

- Quality Assessment Procedures

- Test and inspection methods

• CECC 30 801 XXX : detail specifications tantalum chip capacitors

- Detailed characteristics for each type

The list of all the detail specifications is given in the selection guide, with the corresponding type. To view the last issue, please see the catalogue UTE - Classe C - Electricité

N.B.: some of the products refer to specifications which are no longer published.

In the catalogue, the types for which the CECC symbol is indicated are the ones which are approved. The others types are however submitted to the same process and inspection procedures.

PREFERRED PARTS LISTS

In addition to CECC approvals, some of the products can be entered in Preferred Parts Lists ; the principal ones are the following :

• GAM T1 :Preferred parts list for the French military industry

• GAM T5 :Qualified parts list for the French military industry

• MUAHAG : Qualified parts list for the French military industry

• LNZ 44-04 : Preferred parts list for the French telecommunication industry

• ESA PSS 01-603 : Preferred parts list for the European Space Agency

The position of each type in the above lists is indicated in the selection guide at the beginning of this catalogue.

Search

Download our Catalogs

• All products
• Download our Catalogs

Applications