Innovative low pass filters
Exxelia has developed several ranges of miniature filters with different low-pass configuration (C, L, Pi, T, 2xPi, 2xL and 2xT) mainly intended to protect electronic equipment from interferences.
Low-pass filter solutions are mainly used for EMI suppression in electronics systems. Exxelia Technologies (ex-Eurofarad), part of Exxelia Group, has developed several ranges of miniature filters with different low-pass configuration (C, L, Pi, T, 2xPi, 2xL and 2xT) mainly intended to protect electronic equipment from interferences.
Exxelia Technologies produces sophisticated filters assembling Exxelia Group’s manufactured ceramic capacitors (X7R/ NPO) with ferrite inductors or winding cores in a shielding case. This solution’s main benefits are performance, reliability and optimal traceability.
Considering a filter in a shielding case implies a good metallic package to insure high shielding performances with attenuation up to 10 GHz. Among options, Exxelia offers glass sealing, steel or kovar package using tin, silver or gold plating treatments to withstand any thermally or mechanically challenged applicaiton.
Exxelia offers innovative EMI suppression filter solutions providing great shielding performance including the FC030 feedthrough mounted on shielding enclosure and FCM030 series designed to prevent EMI on printed circuit board.
FC030 series is feedthrough filter allowing to prevent not only EMI conduction but also EMI radiation on power supply or data signals designs up to 200V. FC030 insertion loss can be 20dB at 1MHz to reach 70dB up to 10 GHz. FC030 series is extremely performant on low frequencies applications.
On the other hand, FC030 can offer very low capacitance values starting from 5pF allowing to protect high bandwidth data signals. Operating temperature from -55C° up to +175C°. FC030 series is ESA qualified.
FCM030 features same design and performances’ as FC030 and is intended for surface mount devices. FCM030 is packaged in full metallic silver plated allowing optimal contact with ground plane that improves the interferences flow to the ground.
The series particularly fit for amplifiers, radars, sensitive HMI, accurate measuring.
Nouveau résonateur diélectrique, E7000
Operating frequencies in wireless communications have shifted towards high frequency band and thus frequencies higher than 1 Ghz are now commonly utilized. In addition, the microwave frequency spectrum becoming severely crowded and sub-divided into many different frequency bands, designers are systematically looking for resonators giving them a narrow bandwidth with smaller size. Dielectric resonators are designed to replace resonant cavities in microwave functions such as filters and oscillators. Exxelia Temex, daughter company of Exxelia Group, has developed with support of ESA and CNES, a new high-end dielectric material, E7000 series, designed for high-end filters where high Q factor is requested. E7000 is Ba-Mg-Ta materials based that combines an ultra-high Q factor and the possibility to get all the temperature coefficients upon request. E7000 provides high-performance requested for space use in the frequency range 5 to 32 GHz, and guarantees up to Qxf > 250 000 at 10GHZ. Typical applications: Satellite multiplexing filter devices, radio links for communication systems (LMDS), military radars.
WT83 - Condensateur tantale à électrolyte gélifié
La gamme WT83 est une extension des familles ST79 (suivant les valeurs MIL CLR93) mais avec deux fois plus de capacitance. C'est la solution parfaite pour miniaturiser les conceptions existantes en jouant sur la taille et le poids. Par exemple, le WT83 offre 470µF à 100V en taille D, alors que le ST79 n'offre que 220μF dans les mêmes conditions.