EXXELIA at PCIM 2019
Exxelia will exhibit custom design power transformers and inductors as well as capacitors at PCIM in Nuremberg, Germany, from May 7th to 9th 2019 in booth #136.
Notable at Exxelia’s booth #136 will be custom design power transformers & inductors such as:
FERRITE TRANSFORMER 100kVA-20kHz
This transformer combines high power up to 100kVA, at very high frequency 20kHz, while still providing a weak leakage inductance. Used in an isolated DC/DC converter, its unique morphology made of U and I 126 magnetic circuit improves considerably thermal dissipation while the litz wire winding reduces high frequency losses. Characterized by a primary circuit at 540V / 350Arms and a secondary winding at 270A, this transformer ensures high performance and maximum leakage current reduction.
3 PHASE INDUCTOR 3x5,5mH-9kHz
Used in a high performance converter, this three-phase common mode choke withstands the highest current up to 580A thanks to the use of copper bar for winding while ensuring a minimal inductance of 1,4mH and filtering the far-reaching noise. This deisgn is characterized by its extreme reliability thanks to its magnetic circuit made of 24 nanocrystalline tores, chosen to guarantee a stable inductance value across the temperature range -30°C to +140°C.
Exxelia expose à Electronica China - Stand E5 5580 -
Ultra low ESR, high RF power and high self-resonant frequency The new NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies. The series is available in 1111 size with capacitance ranging from 0. 3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C and at 500 VDC. The lowest ESR is obtained by combining highly conductive metal electrodes and proprietary of new NPO low loss rugged dielectrics. NHB series particularly fits for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment. Felsic HV, long lifetime and high voltage screw terminal The Felsic HV family of aluminum electrolytic screw terminal capacitors provides great performances in energy density and ultra-long lifetime. For example products can withstand 8 000 hours at 105°C under high values of current which makes them the perfect choice to overcome railway constraints. The family also has one of the lowest ESR for aluminum capacitors, less than 10m0hms in most cases. Products are available for voltages from 160 to 450 Vdc, and offer capacitance values from 1500μF up to 47 000μF. Thus the family is a good compromise between reliability and compacity, with for example 47 000μF @ 160V in a 90x200mm volume. Cost-effective common-mode chokes qualified for aerospace Designed and qualified for aerospace, the TCM series is available in a through-hole package for horizontal and vertical mounting. TCM common-mode chokes are offered with inductances from 0.7 to 47mH under rated currents from 0.3A to 4A, and thoroughly tested by a dielectric withstanding strength at 1500VAC. Their excellent thermal properties allow the TCMs to operate without a hitch from -55°C up to +125°C, which, combined to the high mechanical resistance of the chosen materials (all meeting to UL94 V0 rating) make those products the perfect fit for aviation, defense and transportation industries. Two new ranges of Metallized Polyester Film Capacitors qualified for space Ranges PM907S and PM948S of Film capacitors obtained the QPL certification from the European Space Components Coordination (ESCC). PM907S and PM948S part of the PM series, are full ranges of Metallized Polyester Film Capacitors. PM907S products are suitable for voltages from 50V up to 1250V and offer capacitance values from 82nF up to 180μF. PM948S can be used with a voltages from 50V up to 630V with capacitance values from 22nF up to 47μF. Both ranges can support extreme conditions with temperatures from -55°C to +125°C, and offer high energy density, low ESR & ESL and high RMS current. Products are typically being used in SMPS (Switch Mode Poser Suppliers) and BUS filtering. A new range of high capacitance wet tantalum capacitors The new wet tantalum WT83 capacitors series is based on the CLR93 MIL specification but with double the capacitance. For instance, WT83 offers 1000µf 100V in a D size case. That is a pass for impactful miniaturization of existing designs by playing on both size, by reducing the PCB footprint, and weight. Besides, thanks to their hermetically sealed package, the WT83 series can withstand high vibrations and shock levels (50g and 100g respectively) which makes them the solution of choice for Aviation, Space and Defense.
Certification QPL pour les gammes PM907S et PM98S
Les gammes PM907S et PM948S de condensateurs film viennent d’être officiellement qualifiées QPL par l’organisme européen ESCC (European Space Components Coordination). La certification QPL atteste que les performances du produit ont été validées par un organisme accrédité indépendant. Les produits qualifiés QPL offrent une qualité et fiabilité supérieures, qui répondent aux exigences des applications spatiales. Les gammes PM907S et PM948S appartiennent à la famille des condensateurs film polyester métallisés (PET), haute précision. La gamme PM907S est adaptée aux tensions de 50V à 1250V, et offre une capacité allant de 82nF jusqu’à 180μF. La gamme PM948S couvre quant à elle les tensions situées entre 50V et 630V, et offre une capacité allant de 22nF jusqu’à 47μF. Ces deux gammes supportent des conditions extrêmes, des températures oscillant entre -55°C et +125°C, tout en offrant une forte concentration d’énergie, de faibles ESR et ESL, ainsi qu’un courant RMS élevé. Ces produits sont principalement utilisés dans des alimentations à découpage et pour la fonction de filtrage des BUS. La liste des gammes de condensateurs film certifiées QPL et développées par Exxelia, comprend désormais les gammes : – PM90S – PM907S – PM96S (T) – PM94S – PM948S – MKT5 – KM111S – KM94S – HT78PS