Back to news

Exxelia at Space Tech Expo

Exxelia, will be showcasing space grade products at Space Tech Expo on booth #6024 from May 22-24, 2018 in Pasadena, California, USA.

ESA QPL Film Capacitors

PM907S and PM948S are full series of Polyester Film Capacitors. PM907S products are suitable for voltages from 50V up to 1250V and offer capacitance values from 82nF up to 180μF. PM948S can be used from 50V up to 630V with capacitance values from 22nF up to 47μF. Both series can support extreme conditions with temperatures from -55°C to +125°C, and offer high energy density, low ESR & ESL and high RMS current.

Film capacitor Series PM907S and PM948S are ESA QPL certified according to the ESCC Detail Specification No. 3006/025 and 3006/026

 

Smallest ESA QPL Ceramic Capacitor of the Market

Exxelia ranges of low voltage MLCC for surface mounting, CEC19 and CNC19, have achieved the ESA Qualified Part List status under the criteria of the European Space Component Coordination’s (ESCC) 3009/042 and 3009/043 respectively. The  0402 size QPL-qualified parts are available from 10V to 25V, enabling substantial miniaturization and cost-saving. They are available either in the very stable NPO dielectric (type 1) or the high capacitance X7R (type 2). CEC and CNC series combine high capacitance values with high thermal and voltage stability. Versions with polymer terminations are also QPL-certified.

 

Miniature EMI filters for space application

FC030_Feedthrough-filter_ExxeliaExxelia’s gold-plated glass-sealed EMI filters SFC030 is the solution of choice to protect several embedded power supplies and data lines.  These small and reliable filters are available up to 5A @ 200V and 22nF.  Available in a Kovar package, the better alternative to steel for enhanced temperature cycling resistance, all Exxelia’s EMI filters for space are ESA qualified according to ESCC 3008. Thanks to this extensive experience in stringent ESA testing, Exxelia is able to adapt the tests of any filter according to any need (example: SMD 20A chip, 0pF capacitor value for an arrays of filters).

Published on 30 Apr 2018 by Marion Van de Graaf

Best wishes for 2019

What is a capacitor ?

▲ WHAT IS A CAPACITOR ?   Definition from the dictionnary: « Capacitor »: Device able to accumulate charges and to relaunch them in a very short time.    > See our capacitors in catalog    What it really is: It's an electrical component made of 2 conductive armatures (called electrodes) separated by an isolating layer. Its main property is to store electrical charges on its armatures. There is a direct link between the voltage put on the capacitor and the value of the charge at the armatures This coefficient C, the capacitance, is the value caracterizing mathematically the capacitors. As we can identifie a direct link between U and I in the capacitor we can caracterize it as a dipole this way: 3 main dipoles : In the physical reality:   Contacts with the PCB (terminations) + Other internal contact suh as the metallic contacts, or the physical internal resistivity of the used materials. → Resistance in the circuit   Other losses due mainly to the leads → inductive effect in the circuit. Example of possible caracterization: That’s why the Esr is always written « at a certain frequency »  which should be the resonnance frequency. This is also why the capacitors have frequency optimal ranges. The higher the resonance frequency is, the higher the frequencies are withstanded by the capacitor.   In terms of energy Efficient energy is Ec.   In reality E= Ec+Er+Ei with: Ec = Energy due to the ideal capacitor Er = Energy to the ESR Ei = Energy due to the leakage.   So Er and Ei are caracterized by heating (Joule effect). So even if that’s not always a key paramter, the lower the esr the better it is for the circuit.                                                                                                                                                                               If the capacitor is polarized : If the capacitor is not polarized : > See our capacitors in catalog   ▲ MAIN CARACTERISTICS 1) Voltages (V) 2) Capacitance of Capacitor   3) Capacitance / volume 4) Tan Delta / ESR   5) Price of the function Whatever the function, the price of capacitors is important ! A cheap function does not mean a cheap product: 10 caps at 10€ is less expensive than 1 cap at 50€ …    > See our capacitors in catalog   ▲ FINAL OVERVIEW   Technology                                         Benefits of capacitors                          Constrains  Aluminum The least expensive The highest energy density Polarized Difficulties in storage High ESR and tan Delta Lowest temperature range  Ceramic   Ideal for high frequencies The biggest range of values (CAPA voltage)   Highest Price of the functions Low energy density Low values of capacitance  Film Highest ripple curents Highest voltages Lowest ESR and tan Delta Most expensive Lowest energy density High price of the function  Tantalum Lower ESR than aluminum, Good energy density and price of the function Polarized Solid can burn High ESR and tan Delta       > See our capacitors in catalog
Back to news